Factory reset your iPhone Archives

How to Fix iPhone Black Screen Issues Easy Method. black screen on iPhone.

When your iPhone won’t turn on or the screen suddenly goes black, the first thing you can think of is your valuable data and whether you can recover it. If the problem is serious enough, you might think that you need to replace your iPhone.

While black screen of death is a common problem, there are several troubleshooting steps you can take to fix iPhone black screen issues and bring your device back to life.

This guide explains the causes of iPhone black screen and fixes to help you get rid of it.

How to Use iPhone as Wireless Microphone For Mac(Opens in a new browser tab)

What Causes the iPhone Black Screen?

Some of the reasons your iPhone screen may go black include:

1. Charge the battery

Apple iPhone 11, 64GB, Black – Fully Unlocked (Renewed)

How to Fix iPhone Black Screen Issues

As obvious as it may seem, it’s worth making sure your iPhone battery is not drained.

Most devices’ batteries start to drain over time, which means your iPhone may suddenly run out of battery even if you’ve recently charged it. In addition, there may be a rogue application that can drain the battery, so it is best to let it charge for about 15-30 minutes.

- Low battery;
- Unauthorized applications
- Bad or corrupted update
- Unstable firmware.
- Not enough space or space on your iPhone.
- Hardware problems caused by water damage or falls.
- Application or software crashes

Lack of power can also be causing your iPhone screen to go black, but you should see a charging icon after a short amount of time.
If your iPhone does not respond to recharging, check to see if the charging cable or wall charger is damaged. If the original Lightning cable doesn’t work, you can try a third-party iPhone charging cable, but make sure it’s Apple MFi certified.

Alternatively, you can use wireless charging if your iPhone supports it (iPhone 8 or newer).

Check the charging point to make sure it is not dirty, as dust and grime can cause your iPhone to charge improperly. Check out our guide on why your iPhone won’t charge and six ways to fix the problem.

2. Force restart (hard reset) iPhone

If you’ve charged your iPhone’s battery and the screen is still black, there might be a software issue causing your iPhone to freeze or malfunction. A hard reset will usually resolve any software glitches that could cause the iPhone screen to go black or become unresponsive.

3. Update Apps

Sometimes, your iPhone screen may go black or freeze when using a certain app, especially if it is downloading something to your iPhone or downloading from the Internet.

In such cases, it is likely that the problem is with the application itself. But you can fix black screen issues by restarting your iPhone and updating the specific app that is causing the problem.

To update the app, go to the App Store> Updates tab and install any pending updates for the problematic app.

If the app freezes and your iPhone screen goes black when you try to download videos or other media, the problem might be a slow internet connection. However, the issue could also be due to throttling by the media delivery network or your ISP when you hit your bandwidth limit.

You can wait and see if the content downloads and if your iPhone returns to normal. Alternatively, you can switch to a faster internet connection and fix iPhone black screen issue when using video apps.

4. Factory reset your iPhone

Unlike a hard reset, which leaves all your data and settings intact, a factory reset erases everything and leaves your phone as clean and new as it was at the time of purchase.

If the first few solutions didn’t help fix iPhone black screen, it’s best to factory reset your device.
1. To get started, connect your iPhone to your computer using the Lightning cable, open iTunes, wait for iTunes to recognize your iPhone, and then select the icon for your iPhone.
2. Choose Browse> Restore iPhone.
1. When prompted, back up your iPhone to keep all data until you delete it, then select “Restore” to confirm your action.
Wait for the iPhone to restart, after which you can restore it from a backup or leave it as a new iPhone and update it to the latest iOS version.

5. Put iPhone into DFU mode

If your iPhone’s screen is still black, won’t turn on or boot, you can put it into Device Firmware Update (DFU) mode and see if it works again. DFU mode allows you to turn on your iPhone and work around any major problems without starting the OS so you can change or reinstall the operating system.
1. To do this, connect your iPhone to your computer. Press and hold the on/off button for about 10 seconds until the Apple logo appears, and then release the button while holding down the volume button.
2. If your iPhone screen goes black. You are in DFU mode, but if you see the iTunes logo, you need to repeat these steps.
3. Follow the instructions to complete the process. And then check if your iPhone screen returns to normal.
  Top 5 Methods To Fix an iPad Stuck on Apple Logo(Opens in a new browser tab)
6. Reset your iPhone’s proximity sensor

When you bring iPhone up to your face, the screen dims and stays dark, even when the device is turned on and far from your face. This is due to the proximity sensor. But you can reset it and check if it is the reason your iPhone screen is black.
1. To do this, force restart your iPhone and wait for it to restart. , and then tap Settings> General.
1. Click Reset.
1. Then click Reset All Settings.
Note. Clicking “Reset All Settings” does not delete data. it just erases your settings and preferences.

Fix Black Screen Issues for Your iPhone

If you’ve tried all of these solutions and your iPhone screen is still black, make an appointment at the Apple Genius Bar or contact Apple Support for more help.

Remember to check your iPhone’s battery status. Keep your device charged. And install third-party apps from trusted sources to avoid screen freezes or crashes. It is also recommended that you check your iPhone with an antivirus to avoid error attacks and jailbreak your device, as this can compromise built-in security measures.
- How To Fix iPhone Touch Screen Not Working(Opens in a new browser tab)
If your device screen is blank or white, see our guide on iPhone white screen and how to fix it. We’ve also listed some of the troubleshooting steps to take when your iPhone’s touchscreen isn’t working.-

How to Fix iPhone Black Screen Issues Easy Method

How to Fix iPhone Black Screen Issues Easy Method.

How To Fix The iPhone Call Failed Error.

The iPhone Call Failure error appears when your device cannot successfully complete a call. This can happen for a variety of reasons, and if you don’t know what is causing it, you will need to use some of the common methods to see if they can help you fix the problem.

This is actually a serious problem as it prevents you from making any calls from your iPhone. However, after you have applied some of the following methods, we hope the problem goes away from your phone.

Make sure you have funds in your account

Insufficient funds in your prepaid account may result in an iPhone call error. You want your account to have sufficient funds for the call you are trying to make. You can fund your account with different denominations to fund it.

If you have a postpaid account, you will need to talk to your provider to resolve this issue.

Make sure the contact is not blocked

Perhaps the contact you are trying to call is indeed blocked on your iPhone. You want to make sure that this person is not on your blacklist and you can check this as follows.

Launch the Settings app on your iPhone.
Click Phone.

Select Call Blocking and Identification.

Check the list and make sure your contact is not blocked.

Toggle Airplane Mode

Sometimes turning airplane mode on and off fixes the call failed error on iPhone and it’s well worth it. Even if that doesn’t work, you won’t lose anything (other than being online for a while).

–

Start the Settings Application.
Set the airplane mode switch to ON.

Wait about a minute.
Return the switch to the OFF position.

Enable Caller ID Option

Some countries allow you to hide your Caller ID from showing on the recipient’s phones. This feature is not supported in all countries, and you can try turning it off and then see if you can call.

Open the Settings app.
Click Phone.

Select the Show Caller ID option.

Click the toggle next to Show Caller ID.

Disable Do Not Disturb

Do not disturb mode on your iPhone keeps your messages and calls silent, but sometimes it can cause a call failed error on your iPhone. You must turn it off when you call.

Open the Settings app.
Click on the Do Not Disturb option.

Uncheck the toggle next to Do Not Disturb.

Disable call forwarding

Call Forwarding helps you forward incoming calls on your iPhone, and Apple recommends not to turn it on when an iPhone calling error appears on your device.

Launch the Settings app.
Click on the Phone option.
Select the Call Forwarding option.

Disable call forwarding switch.

Disable LTE on your iPhone

Some carriers may not have LTE available in all regions, and you should try switching to 2G or 3G and see if you can then call from your iPhone.

Disabling LTE on iPhone is pretty easy. If that doesn’t work, be sure to turn it back on.

Open the Settings app.
Click Mobile Data.

Click Mobile Data Options.

Select the Enable LTE option.

Click on the “Off” option to turn off LTE.

Set correct date and time

Incorrect date and time settings often lead to a lot of problems, so you need to make sure your iPhone has the correct date settings. If you don’t want to do it manually, your phone can automatically find and set the correct time and date on your device.

Open the Settings app.
Click General.

Select date and time.

Set the Automatic switch to ON.

Update carrier settings on your iPhone

Your carrier may have released an update that reflects changes to their internal systems. In some cases, you need to install a carrier update before you can make further calls.

Open the Settings app.
Click General.

On the next screen select “About”.

If a carrier update is available, your phone will prompt you to install it.

Restart your iPhone

Sometimes a minor issue may be found on your iPhone which is fairly easy to fix by restarting your device. You can do this if you haven’t already.

Save your work and close all running applications on your phone.
Press and hold the Power button to turn off iPhone.

With iPhone turned off, press and hold the Power button to turn it back on.

Close background applications

Most applications usually do not interfere with the standard Phone application. However, you never know that an app installed on your iPhone might be causing the problem. It is worth closing all applications on your phone to see if the problem persists.

Press the Home button twice to see a list of open applications.
Swipe up on apps. and they will be closed.

Re-insert the SIM Card into Your iPhone

If the SIM card is disconnected and not firmly inserted into the slot, it may cause call problems on your device. Fixing this should be quick and easy as all you have to do is take it out and put it back in. If there is a problem with the card itself, you will need to replace it with your provider.

Pull the SIM card tray out of the iPhone.

Remove the SIM card from it.
Insert it back, making sure it fits correctly into the slot.
Slide the tray back into the phone.

Update Your iPhone

Even if you are not taking advantage of the new features that the latest iOS versions have to offer, you should always update your device. This ensures that all bugs and problems that were present in older versions are fixed on your device.

Open the Settings app.
Click General.

Select “Software Update”.

If an update is available, click Download and Install to install it on your phone.

Reset Network Settings

The network settings on your iPhone determine how all network tasks should be performed on your device. If there is a problem with this, you might run into issues like the call failing on your phone.

To fix this, you can reset these settings on your iPhone.

Launch the Settings app.
Click General.

Scroll down and select Reset.

Click Reset Network Settings.