Toggle Airplane Mode Archives

6 Best Way to Fixing Apple Watch Keeps Disconnecting From iPhone

July 15, 2022 by feecalculator_x6rbod

6 Best Way to Fixing Apple Watch Keeps Disconnecting From iPhone.

Your Apple Watch works best when it’s actively connected to your iPhone. Luckily, you don’t usually have to worry about this because both devices automatically communicate via Bluetooth as long as you keep them close.

But if you find that your Apple Watch disconnects from your iPhone frequently (this means a red iPhone-shaped symbol with a slash at the top of the watch face), try the fixes below to troubleshoot and resolve the issue.

1. Check Bluetooth Status

Both your Apple Watch and iPhone require Bluetooth to connect, so a good place to start is to make sure Bluetooth works on both devices.

Check Apple Watch Bluetooth status

1. Press the Digital Crown and open the Settings app (tap the gear icon).

2. Scroll down and press Bluetooth.

3. Make sure the toggle next to Bluetooth is turned on.

Check iPhone Bluetooth Status

1. Open the Settings app on your iPhone.

2. Press Bluetooth to access Bluetooth settings.

3. Make sure the toggle next to Bluetooth is turned on.

2. Toggle Airplane Mode

Turning Airplane Mode on and off restarts Bluetooth on Apple Watch and iPhone. This usually ends up with occasional connection issues preventing communication with Bluetooth devices.

Toggle Airplane Mode on Apple Watch

1. Open the Settings app on your Apple Watch.

2. Scroll down and click “Airplane Mode“.

3. In the Airplane Behavior section, turn off Bluetooth.

4. Activate the switch next to Airplane mode.

5. Wait 10 seconds and turn off Airplane Mode.

Enabling Airplane Mode on iPhone

1. Open the Settings app on your iPhone.

2. Turn on the switch next to Airplane Mode. If this does not change the status next to Bluetooth to Off, tap Bluetooth, disable Bluetooth and return to the previous screen.

3. Wait 10 seconds and turn off airplane mode. If you had to disable Bluetooth manually in the previous step, the status next to Bluetooth should automatically change to Enabled.

3. Restart Devices

If Bluetooth is not the cause, try restarting your Apple Watch and iPhone. This is another quick fix that can fix problems caused by random errors and glitches in system software.

Restart your Apple Watch

1. Press and hold the side button until the power off screen appears.

2. Drag the Power icon to the right and wait 30 seconds.

3. Press and hold the side button again until you see the Apple logo to turn the watch back on.

Restart your iPhone

1. Open the Settings app and tap General > Turn off.

2. Drag the Power icon to the right and wait 30 seconds.

3. Hold down the Side/Power button until you see the Apple logo to turn iPhone back on.

4. Update System Software

Updating your Apple Watch and iPhone system software can also fix persistent connectivity issues. If you have Wi-Fi access, you can update both Apple devices by following these steps.

Update system software on Apple Watch

1. Place your Apple Watch on the magnetic charger. You also need it to be at least 50% charged in order to start the upgrade.

2. Swipe up from the bottom of the watch face to open Control Center. Then press and hold the Wi-Fi icon and connect to an available Wi-Fi network (if not already connected).

3. Press the Digital Crown and select Settings.

4. Scroll down and click Software Update.

5. Wait while your smartwatch scans for new updates.

6. Click Download and Install to update watchOS to the latest version.

Update system software on iPhone

1. Open the Settings app on your iPhone.

2. Tap Wi-Fi and connect to an available Wi-Fi network (if not already connected). Then return to the previous screen.

3. Click General.

4. Click Software Update.

5. Wait while your phone searches for new updates.

6. Click Download and Install to update iOS. If the battery level is below 50%, you must connect iPhone to a charging source to complete the update.

Related: Can’t update the operating system on your Apple Watch or iPhone? Learn how to fix stuck watchOS or iOS updates.

5. Reset Network Settings on iPhone

If you still have connection problems between your Apple Watch and iPhone, try resetting the network settings on your iOS device. This can fix a potentially corrupt Bluetooth configuration.

Note. This process will also disconnect you from any Wi-Fi networks, so make sure you know the password for your Wi-Fi network before you begin so you can reconnect to it.

1. Open the Settings app on your iPhone.

2. Select General > Transfer or Reset iPhone > Reset.

3. Click “Reset network settings”.

4. Enter your device password.

5. Click “Reset network settings” again.

6. Unpair and Reconnect Watch

If none of the fixes above worked, the next logical step would be to reset your Apple Watch to factory defaults. We recommend that you do this through the Apple Watch app on your iPhone because it creates an up-to-date backup of your data that you can restore later.

Reset Apple Watch with iPhone

If your Apple Watch is actively connected to a paired iPhone:

1. Open the Apple Watch app and go to the My Watch tab.

2. Tap the All Clocks option in the top left corner of the screen.

3. Tap the Info icon next to Apple Watch.

4. Click Turn Off Apple Watch.

5. Tap “Turn Off Apple Watch [your name]” to confirm.

Reset Apple Watch via watchOS

If your Apple Watch is not connected to iPhone:

1. Press the Digital Crown and select Settings.

2. Click General.

3. Scroll down and click Reset.

4. Click “Delete all content and settings”.

5. Enter your device passcode and click Erase All to confirm.

Follow this by reconnecting your Apple Watch to your iPhone. If you have a backup of your Apple Watch data on your iOS device, you can restore it.

Strong Relationship

Switching Airplane Mode or resetting the system software is all that’s usually required to resolve communication issues between Apple Watch and iPhone. Only resort to advanced troubleshooting if the problem occurs again and again. If nothing works and your Apple Watch keeps turning off, contact Apple Support to find out what to do next.

6 Best Way to Fixing Apple Watch Keeps Disconnecting From iPhone

Apple watch not unlocking iphone : how to Fix

December 16, 2021 by feecalculator_x6rbod

How To Fix Apple Watch Not Unlocking iPhone.Apple watch not unlocking iphone : how to Fix.

Apple Watch won’t unlock your iPhone? There are many reasons for this, such as Bluetooth and Wi-Fi problems, outdated system software, and corrupted network settings.

Read :How to delete apps from apple watch

Work through the suggestions and solutions below to get Apple Watch to unlock iPhone again.

Before You Start

Although Apple Watch Unlock is enabled on your iPhone, this feature will not work if you:

do not wear your Apple Watch. watchOS uses wrist detection to detect this. Manually unlock your iPhone every time you strap on your Apple Watch. Don’t forget to unlock your Apple Watch.

Double-Check Bluetooth and Wi-Fi

Your Apple Watch and iPhone use Bluetooth and Wi-Fi to communicate with each other. Therefore, the best place to start is by making sure the Bluetooth and Wi-Fi radios are turned on and working on each device.

iPhone

Swipe down from the top-right corner of the screen to open the iPhone Control Center. Then make sure the Bluetooth and Wi-Fi icons are active. If not, click to activate them.

Apple Watch

Press the Digital Crown and select Settings (gear-shaped icon). Then scroll down and tap Bluetooth & Wi-Fi. If the switches on the following screens are grayed out, turn them on.

Read:The 4 Best Third-Party Apple Watch Chargers in 2021

Toggle Airplane Mode

Switching Airplane Mode on your iPhone and Apple Watch helps reboot the Bluetooth and Wi-Fi radios inside. This is a quick way to fix any random crashes preventing devices from communicating with each other.

iPhone

1. Open iPhone Control Center and turn off Bluetooth and Wi-Fi. Then touch the airplane mode icon and wait 10 seconds before touching the icon again. Then reactivate Bluetooth and Wi-Fi.

Apple Watch

Go to the Settings app and turn off Bluetooth and Wi-Fi. Then go to the watch face, swipe up to open Control Center, and then activate and deactivate airplane mode. Finally, go back to the Settings app and reactivate Bluetooth and Wi-Fi.

Restart iPhone and Apple Watch

The next fix involves restarting both devices. This clears up system caches and helps resolve other software-related glitches that prevent Apple Watch from unlocking iPhone.

iPhone

Open the Settings app and tap General> Shut Down. Then drag the Slide to Power Off slider to turn off the device. Wait 10-20 seconds before holding the side button to restart it.

Apple Watch

Press and hold the side button and drag the Power Off slider to turn off the device. Then wait 10-20 seconds and press the side button again to restart it.

Disable/Re-enable Unlock with Apple Watch

If Apple Watch still can’t unlock your iPhone, try deactivating and reactivating Unlock with Apple Watch. Setting up a feature from scratch may help solve the problem.

To do this, open the iPhone Settings app, tap Face ID & Passcode, and enter the passcode to lock the iPhone screen. Then scroll down to the Unlock with Apple Watch section and turn off the switch next to Apple Watch [your name].

Then restart your iPhone and Apple Watch, go back to the Face ID and password settings on your iPhone, and reactivate unlocking with your Apple Watch.

Reset Face ID on iPhone

Since Face ID is closely related to Unlock with Apple Watch, your next solution is to reset your Face ID profile.

To do this, open the iPhone Settings app and select Face ID & Password. Then enter your device password and tap Reset Face ID.

Finally, restart your iPhone, re-enter your Face ID and password settings, and click Set Up Face ID to set up your Face ID profile from scratch.

Reset Passcode on Apple Watch

If Unlock with Apple Watch still doesn’t work, try resetting your Apple Watch password. To do this, open the Watch app on your iPhone and tap Password. Then click Disable Password to remove the password from your Apple Watch. Then click “Enable Password” to set the password again.

Note. Resetting your Apple Watch password has disabled the Unlock with Apple Watch feature, so be sure to reactivate it by visiting the Face ID and password settings on your iPhone.

Update iOS and watchOS

Updating iOS and watchOS can help eliminate known system software issues due to Apple Watch Unlock interference. For example, Apple has acknowledged an issue on iPhone 13 that results in the “Unable to contact Apple Watch” error. The recommended fix is to update to iOS 15 and watchOS 8.

iPhone

Open the Settings app and go to General> Software Update. If you see a pending iOS update, click Download and Install.

Apple Watch

Place Apple Watch in the charger. Then press the digital crown and go to Settings> General> Software Update. If you see a pending watchOS update, click Download and Install.

You can also open the Watch app on your iPhone and tap General> Software Update> Download & Install to update your Apple Watch.

Reset the iPhone’s Network Settings

Damaged or conflicting network settings on your iPhone can also play a role in preventing your Apple Watch from unlocking. So dropping them is a good idea.

To do this, open the iPhone Settings app and go to Settings> General> Transfer or Reset iPhone Settings. Then click “Reset Network Settings”.

Backup and Reset Your Apple Watch

If the problem persists or recurs intermittently, consider resetting your Apple Watch. This is the best way to fix basic watchOS issues.

To do this, open the Watch app, select All Watches (in the upper-right corner of the My Watch tab), tap the Info icon next to Apple Watch, and tap Unpair Apple Watch. Then, your iPhone will back up and reset your watchOS device.

After that, proceed by reconnecting your Apple Watch to your iPhone. You will be able to restore data during the setup procedure.

Detailed step-by-step instructions can be found here on how to back up and restore your Apple Watch.

also read:How To Unlock Your Mac With An Apple Watch

Backup and Reset Your iPhone

If none of the above fixes helped, it’s time to factory reset your iPhone. Just be sure to back up your data so you can restore everything after the reset procedure. Also, don’t forget to set up “Unlock with Apple Watch” after that. Hope this fixes the problem for good.

How To Fix Apple Watch Not Unlocking iPhone

Apple watch not unlocking iphone : how to Fix

how to backup iphone to icloud

October 19, 2021 by feecalculator_x6rbod

iPhone Not Backing Up to iCloud? 15 Fixes to Try.iphone not backing up to icloud.How to backup iphone to icloud.

Apple Cloud Storage with iCloud Backup provides an incredibly convenient way to protect your iPhone’s data. Unfortunately, for various reasons, such as connection problems and conflicting system settings, iPhone may not back up to iCloud.

Luckily, it doesn’t take a lot of work to get iCloud Backup working again on your iPhone. So, here are 15 fixes you can try.

Table of Contents – iphone not backing up to icloud

The following troubleshooting tips apply to the following issues with iCloud Backup:

The Back Up Now option is grayed out in iCloud Backup.
The iCloud backup generates errors — for example, “The last backup could not be completed.”
iCloud backup is taking too long to back up or stuck at Estimated Time Remaining.
iCloud backup is not working storage space.

1. Connect to Wi-Fi

iCloud Backup only works with Wi-Fi, so if you’re using cellular bandwidth to connect to the Internet on your iPhone, you won’t be able to back up your data to iCloud. You will also fail to manually initiate a backup because the Back Up Now option (found under Settings> Apple ID> iCloud> iCloud Backup) is grayed out for mobile data.

Even if you’ve connected your iPhone to a Wi-Fi network, a weak connection can take an unusually long time for iCloud backups. Keep your iOS device near your router or access point to ensure full Wi-Fi signal strength.

2. Charge Your iPhone

Your iPhone battery must also be at least 50% charged for automatic or manual iCloud backups. If not, just plug your device into the charger and you should be fine.

– adngin-InContent_1-0

3. Check the System Status

If you’re still having problems with iPhone not backing up to iCloud, it’s a good idea to check if everything is ok on the server side. You can do this by visiting the Apple System Status page.

If the status next to iCloud Backup indicates any problems with the service, you should wait until Apple fixes the problem. This usually happens within a couple of hours.

4. Toggle Airplane Mode

Try switching Airplane Mode on your iPhone. It helps reboot the Wi-Fi radio and helps fix minor connection issues. To do this, open the iPhone Control Center and tap the airplane mode icon. Then wait a few seconds and tap it again.

Soft resetting your network router (if physically accessible) or renewing your iPhone’s IP lease can also fix strange glitches on your Wi-Fi connection.

5. Change DNS Servers

Setting up your iPhone with widely used DNS (Domain Name Service) can help it find the appropriate iCloud backup servers without any problems. Google DNS is a great choice.

So, start by going to Settings> Wi-Fi and select an active Wi-Fi connection. Then click Configure DNS, select Manual and replace any existing DNS records with the following:

8.8.8.8

8.8.4.4

Click “Save” to apply the changes. Please note that they will not replace DNS servers for other Wi-Fi connections that you may have saved on your iPhone.

6. Disable Low Data Mode

Low data mode helps conserve your Wi-Fi bandwidth, but it also limits background activities like automatic iCloud backups. This can cause issues such as the iPhone not backing up to iCloud. Stick to a manual backup, or turn off Low Data Mode by going to Settings> Wi-Fi and turning off the toggle next to Low Data Mode in the info bar of an active Wi-Fi connection.

7. Disable Low Power Mode

Low Power Mode is another built-in iOS feature that discourages background activity. Although your iPhone needs to be charged to at least 50% charged, enabling Low Power Mode may stop automatic iCloud backups. You can turn it off by going to Settings> Battery and turning off the switch next to Power Saving Mode.

8. Free Up iCloud Storage

If there is little or no storage space in iCloud, your iPhone will temporarily pause iCloud backups until you free up more space.

To manage your iCloud storage, go to Settings> Apple ID> iCloud> Manage iCloud. You can then review and delete any unwanted forms of data. Or click Change Billing Plan to go to the next level of iCloud storage.

9. Restart Your iPhone

Restarting your iPhone can be a quick fix for most iOS problems. So, open the Settings app and tap General> Turn Off. When the device finishes shutting down, press and hold the side button to restart it. After that, try backing up to iCloud.

10. Update iOS

If iCloud backup won’t start or continue to crash, updating your iPhone can help fix any known bugs and issues with this functionality.

To do this, open the Settings app and choose General> Software Update. Then click Download and Install.

11. Toggle iCloud Backup On/Off

You can also try turning iCloud backup on and off. It might just fix any random connection issues when your iPhone isn’t backing up to iCloud. To do this, go to Settings> Apple ID> iCloud and turn off the switch next to iCloud Backup. Wait a while and then turn it back on.

12. Delete Previous Backups

Your iPhone is backing up data incrementally to iCloud, so any inconsistencies or corruption issues in your existing cloud copy could be causing the iCloud backup to fail. Removing it and running a full backup can help.

To do this, open the iPhone Settings app and choose Apple ID> iCloud> Manage Storage> Backup. Then select your iPhone backup and tap Delete Backup> Power Off & Delete.

13. Sign Out/Sign Back Into iPhone

If none of the above fixes worked, try logging out and then logging back in to your iPhone. To do this, open the Settings app and tap your Apple ID. Then click “Exit”.

When you are finished signing out, restart your iPhone, open the Settings app again, and tap Sign In to iPhone to sign in to your device.

14. Back Up Using iTunes or Finder

You can also use iTunes or Finder to create an iCloud backup. Start by connecting your iPhone to your Mac or PC via USB and tap Trust. Then select your iPhone, select the option “Back up your most important iPhone data to iCloud” and select “Back up now”.

15. Reset Network Settings or All Settings

Performing a network settings reset can fix basic connectivity issues, while performing a full factory reset helps fix problems caused by misconfigured settings in general.

To access the reset options, open the Settings app and go to General> Reset. Then select “Reset Network Settings” or “Reset All Settings” to reset iPhone settings if necessary.

Note. After resetting the network settings, you must reconnect to any previously saved Wi-Fi hotspots. If you choose to reset all settings on your iPhone, you must also reconfigure any settings related to accessibility, privacy, etc.

Issues With iCloud Backup Fixed

The above list of fixes should help you fix iPhone not backing up to iCloud issues. If not, your best bet is to contact Apple Support to resolve any issues with your iCloud account. In the meantime, we highly recommend backing up your iPhone data to Mac or PC.

iPhone Not Backing Up to iCloud? 15 Fixes to Try

How to backup iphone to icloud

iphone not backing up to icloud

How To Fix The iPhone Call Failed Error

October 10, 2020 by feecalculator_x6rbod

How To Fix The iPhone Call Failed Error.

The iPhone Call Failure error appears when your device cannot successfully complete a call. This can happen for a variety of reasons, and if you don’t know what is causing it, you will need to use some of the common methods to see if they can help you fix the problem.

This is actually a serious problem as it prevents you from making any calls from your iPhone. However, after you have applied some of the following methods, we hope the problem goes away from your phone.

Make sure you have funds in your account

Insufficient funds in your prepaid account may result in an iPhone call error. You want your account to have sufficient funds for the call you are trying to make. You can fund your account with different denominations to fund it.

If you have a postpaid account, you will need to talk to your provider to resolve this issue.

Make sure the contact is not blocked

Perhaps the contact you are trying to call is indeed blocked on your iPhone. You want to make sure that this person is not on your blacklist and you can check this as follows.

Launch the Settings app on your iPhone.
Click Phone.

Select Call Blocking and Identification.

Check the list and make sure your contact is not blocked.

Toggle Airplane Mode

Sometimes turning airplane mode on and off fixes the call failed error on iPhone and it’s well worth it. Even if that doesn’t work, you won’t lose anything (other than being online for a while).

–

Start the Settings Application.
Set the airplane mode switch to ON.

Wait about a minute.
Return the switch to the OFF position.

Enable Caller ID Option

Some countries allow you to hide your Caller ID from showing on the recipient’s phones. This feature is not supported in all countries, and you can try turning it off and then see if you can call.

Open the Settings app.
Click Phone.

Select the Show Caller ID option.

Click the toggle next to Show Caller ID.

Disable Do Not Disturb

Do not disturb mode on your iPhone keeps your messages and calls silent, but sometimes it can cause a call failed error on your iPhone. You must turn it off when you call.

Open the Settings app.
Click on the Do Not Disturb option.

Uncheck the toggle next to Do Not Disturb.

Disable call forwarding

Call Forwarding helps you forward incoming calls on your iPhone, and Apple recommends not to turn it on when an iPhone calling error appears on your device.

Launch the Settings app.
Click on the Phone option.
Select the Call Forwarding option.

Disable call forwarding switch.

Disable LTE on your iPhone

Some carriers may not have LTE available in all regions, and you should try switching to 2G or 3G and see if you can then call from your iPhone.

Disabling LTE on iPhone is pretty easy. If that doesn’t work, be sure to turn it back on.

Open the Settings app.
Click Mobile Data.

Click Mobile Data Options.

Select the Enable LTE option.

Click on the “Off” option to turn off LTE.

Set correct date and time

Incorrect date and time settings often lead to a lot of problems, so you need to make sure your iPhone has the correct date settings. If you don’t want to do it manually, your phone can automatically find and set the correct time and date on your device.

Open the Settings app.
Click General.

Select date and time.

Set the Automatic switch to ON.

Update carrier settings on your iPhone

Your carrier may have released an update that reflects changes to their internal systems. In some cases, you need to install a carrier update before you can make further calls.

Open the Settings app.
Click General.

On the next screen select “About”.

If a carrier update is available, your phone will prompt you to install it.

Restart your iPhone

Sometimes a minor issue may be found on your iPhone which is fairly easy to fix by restarting your device. You can do this if you haven’t already.

Save your work and close all running applications on your phone.
Press and hold the Power button to turn off iPhone.

With iPhone turned off, press and hold the Power button to turn it back on.

Close background applications

Most applications usually do not interfere with the standard Phone application. However, you never know that an app installed on your iPhone might be causing the problem. It is worth closing all applications on your phone to see if the problem persists.

Press the Home button twice to see a list of open applications.
Swipe up on apps. and they will be closed.

Re-insert the SIM Card into Your iPhone

If the SIM card is disconnected and not firmly inserted into the slot, it may cause call problems on your device. Fixing this should be quick and easy as all you have to do is take it out and put it back in. If there is a problem with the card itself, you will need to replace it with your provider.

Pull the SIM card tray out of the iPhone.

Remove the SIM card from it.
Insert it back, making sure it fits correctly into the slot.
Slide the tray back into the phone.

Update Your iPhone

Even if you are not taking advantage of the new features that the latest iOS versions have to offer, you should always update your device. This ensures that all bugs and problems that were present in older versions are fixed on your device.

Open the Settings app.
Click General.

Select “Software Update”.

If an update is available, click Download and Install to install it on your phone.

Reset Network Settings

The network settings on your iPhone determine how all network tasks should be performed on your device. If there is a problem with this, you might run into issues like the call failing on your phone.

To fix this, you can reset these settings on your iPhone.

Launch the Settings app.
Click General.

Scroll down and select Reset.

Click Reset Network Settings.

Factory reset your iPhone

If the iPhone calling error still occurs even after following all of the above methods, you can restart your device and set it up as a new phone. This should definitely fix the bug.

Open the Settings app.
Click General.

Click Reset.

Select Erase All Content and Settings.

We understand how important it is to call sometimes, and not being able to do so really drives people crazy. If our guide helped you fix the iPhone call failed issue on your phone, please let us know which method worked for you in the comments below.

–